Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER CONTROL RELAY › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301905 HEADLIGHT CLEANER CONTROL RELAY A

WIPER / WASHER  HEADLIGHT CLEANER CONTROL RELAY  INSTALLATION  


PROCEDURE

Hide 85942 1.INSTALL HEADLIGHT CLEANER CONTROL RELAY

a.
E224705

Engage the claw to install the headlight cleaner control relay as shown in the illustration.


b.
E224706

Install the washer jar assembly with the bolt.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Engage the clamp.


d.

Connect the 2 connectors.


e.

Connect the 2 washer hoses.


f.

Engage the 2 washer hoses to the hose clamp.


g.
E223791

Install the 2 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


h.

Engage the clamp.


i.

Connect the 2 connectors.


j.

Connect the washer jar cap to the washer jar assembly.

NOTICE:

Confirm that it is correctly inserted into the washer jar assembly.



k.

Engage the clip.


Hide 3.INSTALL FRONT BUMPER ASSEMBLY