Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › RADIATOR › from 2017.12
RM2070E _51 Engine / Hybrid System _061911 2ZR-FXE COOLING _0301629 RADIATOR A

2ZR-FXE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 53289A 2.REMOVE RADIATOR SUPPORT OPENING COVER

Hide 8.DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 51441 9.REMOVE NO. 1 ENGINE UNDER COVER

Hide 16571C 11.DISCONNECT NO. 1 RADIATOR HOSE

a.
A213428

Disconnect the No. 1 radiator hose from the radiator assembly.


Hide 16572D 12.DISCONNECT NO. 2 RADIATOR HOSE

a.
A213429

Disconnect the No. 2 radiator hose from the radiator assembly.


Hide 13.REMOVE FRONT BUMPER ASSEMBLY

Hide 53208A 15.REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY

a.
A216553

Disconnect the water by-pass hose clamp from the radiator support RH.


b.

w/o Engine hood courtesy switch:

i.
A280246E01
0.105,0 0.366,0.197 0.261,0.197 10 *A 0.105,2.26 0.366,2.457 0.261,0.197 10 *B

Disconnect the clamp and hood lock control cable wire.

Text in Illustration
*A for LHD
*B for RHD



c.

w/ Engine hood courtesy switch:

i.
A253388

Disconnect the clamp and hood lock control cable wire.


ii.

Disconnect the clamp and engine hood courtesy switch connector.



d.
A252920

Disconnect the 2 clamps and 2 connectors.


e.
A213427

Disconnect the 2 connectors.


f.
A216554

Remove the 2 bolts, radiator support RH and radiator support LH.


g.

Remove the 2 radiator support cushions from the radiator support RH and radiator support LH.


h.
A213431

Remove the 4 bolts and hood lock support sub-assembly.


Hide 16712 19.REMOVE NO. 2 FAN SHROUD

a.
A213434

Disconnect the No. 1 water by-pass hose from the radiator assembly.


b.
A213435

Disconnect the No. 3 water by-pass hose from the radiator assembly.


c.
A252919

Disconnect the 4 clamps and No. 3 water by-pass hose from the No. 2 fan shroud.


d.
A252921

Disconnect the 4 clamps and No. 5 inverter cooling hose from the fan shroud.


e.
A252918

Remove the 2 bolts, 2 claws and No. 2 fan shroud from the radiator assembly.


Hide 16400 20.REMOVE RADIATOR ASSEMBLY

a.
A253417

Remove the radiator assembly with the fan shroud.

NOTICE:

Do not apply any excessive force to the radiator assembly (for inverter coolant), cooler condenser assembly or pipe when removing the radiator assembly.



b.

Remove the 2 lower radiator supports.


c.
A248166

Remove the 2 bolts and radiator assembly.