Home › Vehicle Exterior › WIPER / WASHER › WIPER ECU › from 2020.08
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301906 WIPER ECU A

WIPER / WASHER  WIPER ECU  INSTALLATION  


PROCEDURE

Hide 85940 1.INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

a.

Install the windshield wiper relay assembly with the bolt.


b.

Connect the connector.


Hide 3.INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).