DTC C1300 Skid Control ECU Malfunction |
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
| C1300 | - | Skid control ECU internal malfunction. | Skid control ECU (Brake booster with master cylinder assembly) |
| 1.REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY |
Replace the skid control ECU (brake booster with master cylinder assembly) (Click here).
Perform initialization and calibration of the linear solenoid valve (Click here).
Perform zero point calibration of the yaw rate and acceleration sensor (Click here).
Perform the sensor check in the Test Mode procedure (Click here).
| NEXT | ||
| ||