Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

DTC    B15C0    Short in GPS Antenna

DTC    B15C1    Open in GPS Antenna

for Preparation Click here


DESCRIPTION

These DTCs are stored when a malfunction occurs in the amplifier antenna assembly.

DTC No.
DTC Detection Condition
Trouble Area
B15C0
Navigation antenna error
  1. Navigation antenna cord
  2. Antenna cord sub-assembly
  3. No. 2 antenna cord sub-assembly
  4. Amplifier antenna assembly
  5. Extension module
B15C1
Error of the power source to the navigation antenna

INSPECTION PROCEDURE

NOTICE:
After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

1.CHECK CONNECTION OF NAVIGATION ANTENNA CORD
  1. Check if the navigation antenna cord is securely connected to the extension module.

    OK:
    Navigation antenna cord is securely connected.



NG
SECURELY CONNECT NAVIGATION ANTENNA CORD
OK


2.REPLACE NAVIGATION ANTENNA ASSEMBLY
  1. Replace the navigation antenna assembly with a known good one and check if the same DTC is output again (Click here).

    1. Clear the DTCs (Click here).

    2. Recheck for DTCs and check if the same DTC is output again.

      OK:
      No DTCs are output.



NG
REPLACE EXTENSION MODULE (Click here)
OK

END