2 or more ECUs and/or sensors do not appear on the Techstream "CAN Bus Check" screen.
| One side of CAN branch line is open, or output signals are incomplete.
- ECM
- Brake booster with master cylinder assembly (Skid control ECU)
- Main body ECU (Multiplex network body ECU)
- Air conditioning amplifier assembly
- Power steering ECU assembly
- Smart key ECU assembly (Certification ECU)*1
- Airbag sensor assembly
- Spiral cable with sensor sub-assembly (Steering sensor)
- Power management control ECU
- Combination meter assembly
- Radio and display receiver assembly*2
|