Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT SEAT SIDE AIRBAG ASSEMBLY

FRONT SEAT SIDE AIRBAG ASSEMBLY > REMOVAL

for Preparation Click here


CAUTION:
  1. Be sure to read Precaution thoroughly before servicing (Click here).
  2. Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
  3. If the side airbag was deployed, replace the front seat airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.
    w/ Non-removable Headrest: (Click here)
    w/ Removable Headrest: (Click here)

HINT:
Use the same procedure for the LH side and RH side.



1. REMOVE FRONT SEAT ASSEMBLY
w/ Non-removable Headrest: (Click here)
w/ Removable Headrest: (Click here)


2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
w/ Non-removable Headrest:
w/ Removable Headrest:


3. SEPARATE FRONT SEAT AIRBAG ASSEMBLY
w/ Non-removable Headrest:
w/ Removable Headrest:


4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (w/ Non-removable Headrest)


    B299151
  1. Remove the 5 hog rings.



    B296401
  1. Remove the 3 hog rings.



    B296403
  1. Turn back the separate type front seatback cover.



    B299152
  1. Remove the 2 nuts and the 3 brackets.

  1. Remove the separate type front seatback cover with pad.



5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (w/ Removable Headrest)


    B299151
  1. Remove the 5 hog rings.



    B301367
  1. Remove the 3 hog rings.



    B301369
  1. Turn back the separate type front seatback cover.



    B299158
  1. Remove the 2 nuts and the 3 brackets.



    B296379
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.

  1. Remove the separate type front seatback cover with pad.



6. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    B300261
  1. Disengage the 2 clamps.

  1. Remove the 2 nuts and the front seat airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.