SEAT HEATER SYSTEM > OPERATION CHECK |
| CHECK THE THERMOSTAT IN THE FRONT SEAT CUSHION HEATER ASSEMBLY LH |
Remove the front seat cushion heater assembly LH (Click here).
Remove the front seatback heater assembly LH (Click here).
![]() |
Connect the B front seat cushion heater assembly LH connector and C front seatback heater assembly LH connector.
Apply auxiliary battery voltage and check operation of the front seat heater as shown in the table below.
| Connection | Specified Condition |
| Auxiliary battery positive (+) → Terminal A-2 Auxiliary battery negative (-) → Terminal A-1 | Front seat heater temperature 36 to 44°C (96 to 111°F) |
| *a | Component with harness connected (Front Seat Cushion Heater Assembly LH) |
| *b | Component with harness connected (Front Seatback Heater Assembly LH) |
| CHECK THE THERMOSTAT IN THE FRONT SEAT CUSHION HEATER ASSEMBLY RH |
Remove the front seat cushion heater assembly RH (Click here).
Remove the front seatback heater assembly RH (Click here).
![]() |
Connect the B front seat cushion heater assembly RH connector and C front seatback heater assembly RH connector.
Apply auxiliary battery voltage and check operation of the front seat heater as shown in the table below.
| Connection | Specified Condition |
| Auxiliary battery positive (+) → Terminal A-3 Auxiliary battery negative (-) → Terminal A-4 | Front seat heater temperature 36 to 44°C (96 to 111°F) |
| *a | Component with harness connected (Front Seat Cushion Heater Assembly RH) |
| *b | Component with harness connected (Front Seatback Heater Assembly RH) |