Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › INTELLIGENT PARKING ASSIST SYSTEM

DTC    C1662    Ambient Temperature High

for Preparation Click here


DESCRIPTION

This DTC is stored when the parking assist ECU judges that the temperature has increased to a point that can cause a malfunction of the parking assist ECU.

DTC No.
DTC Detection Condition
Trouble Area
C1662
Ambient temperature high
Parking assist ECU

INSPECTION PROCEDURE

NOTICE:
  1. When "System initializing" message is displayed on the navigation receiver assembly after the battery terminal disconnected, correct the steering angle neutral point (Click here).
  2. Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the intelligent parking assist system may be needed (Click here).

1.CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result:
    Result
    Proceed to
    DTC C1662 is output
    A
    No DTC is output
    B

    HINT:
    1. If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary increase in ambient temperature.
    2. If DTC C1662 is output frequently, duplicate the problem symptoms and perform the inspection again, even though the DTC is not output when rechecking for DTCs (Click here).



B
USE SIMULATION METHOD TO CHECK (Click here)
A

REPLACE PARKING ASSIST ECU (Click here)