Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE (for Front Side)

WASHER NOZZLE (for Front Side) > ADJUSTMENT

for Preparation Click here



1. REMOVE WASHER NOZZLE SUB-ASSEMBLY
(Click here)


2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    E238060E01
  1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.
    Text in Illustration 
    *a
    Discrimination Number

    Available Washer Nozzle:
    Part Number
    Discrimination Number
    Washer Fluid Injection Angle
    85381-52430
    12
    0°
    85381-52440
    10
    -2°
    85381-52450
    14
    +2°



3. INSTALL WASHER NOZZLE SUB-ASSEMBLY
(Click here)