DTC 36 ABS Control System Malfunction |
DTC 43 ABS Control System Malfunction |
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
| 36 | - | Malfunction in the ABS control system. | ABS control system |
| 43 | - | Malfunction in the ABS control system. | ABS control system |
| 1.CHECK ABS CONTROL SYSTEM |
Clear the DTCs (Click here).
Turn the power switch on (ready).
Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.
Check if an ABS control system DTC is output (Click here).
| Result | Proceed to |
| ABS control system DTC is not output. | A |
| ABS control system DTC is output. | B |
|
| ||||
| A | |
| 2.RECONFIRM DTC |
Turn the power switch off (lock).
Clear the DTCs (Click here).
Turn the power switch on (ready).
Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.
Check if the same DTC is output (Click here).
| Result | Proceed to |
| DTCs 36 and 43 are not output. | A |
| DTCs 36 and/or 43 are output (for LHD). | B |
| DTCs 36 and/or 43 are output (for RHD). | C |
|
| ||||
|
| ||||
| A | ||
| ||