16671
1.INSTALL FLOW SHUTTING VALVE (WATER VALVE)
Install a new gasket to the flow shutting valve (water valve).
Install the flow shutting valve (water valve) with the 2 bolts.
Remove the water outlet from the vise.
Install a new water outlet gasket to the cylinder head sub-assembly.
Connect the No. 10 water by-pass hose and slide the clip to secure it.
Install the water outlet with the flow shutting valve (water valve) with the 2 nuts.
Connect the No. 9 water by-pass hose and slide the clip to secure it.
Connect the No. 3 radiator hose and slide the clip to secure it.
Engage the clamp to connect the wire harness to the water outlet.
Connect the 3 connectors.
G9200
2.INSTALL INVERTER WITH CONVERTER ASSEMBLY
3.ADD ENGINE COOLANT (for Engine)
4.INSPECT FOR COOLANT LEAK (for Engine)