Wear protective gloves. Sharp areas on the parts may injure your hands.
Lumbar support adjuster assembly is available only on the driver side.
Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
71587
1.INSTALL FRONT SEATBACK EDGE PROTECTOR
72760D
2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
|
Install in this direction |
Install the lumbar support adjuster assembly LH to the front seatback frame sub-assembly LH as shown in the illustration.
Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly LH.
Engage the clamp.
Connect the lumbar support adjuster assembly LH connector.
3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
71931
4.INSTALL FRONT SEAT HEADREST SUPPORT
5.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71862
6.INSTALL FRONT SEAT INNER CUSHION SHIELD LH
71812D
7.INSTALL FRONT SEAT CUSHION SHIELD LH
71868A
8.INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH
71074S
9.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
10.INSTALL FRONT SEAT ASSEMBLY LH