Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat)
RM3210E _58 Vehicle Interior _047549 SEAT _0234665 LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) A

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Lumbar support adjuster assembly is available only on the driver side.

·

Use the same procedure for RHD and LHD vehicles.

·

The following procedure is for LHD vehicles.



PROCEDURE

Hide 71587 1.INSTALL FRONT SEATBACK EDGE PROTECTOR

Hide 72760D 2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

a.
B439763C01
0,0 0,0 false
V113147

Install in this direction


Install the lumbar support adjuster assembly to the front seatback frame sub-assembly as shown in the illustration.


b.
B432134

Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.


c.
B432140

Engage the clamp.


d.

Connect the lumbar support adjuster assembly connector.


Hide 3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

Hide 71931 4.INSTALL FRONT SEAT HEADREST SUPPORT

Hide 5.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Hide 71862 6.INSTALL FRONT SEAT INNER CUSHION SHIELD LH

Hide 71812D 7.INSTALL FRONT SEAT CUSHION SHIELD LH

Hide 71849 8.INSTALL SEAT ADJUSTER COVER CAP LH

Hide 72526A 9.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

Hide 72551 10.INSTALL NO. 1 RECLINING HINGE COVER

Hide 72495 11.INSTALL VERTICAL ADJUSTING HANDLE LH

Hide 71074S 12.CONNECT SEPARATE TYPE FRONT SEATBACK COVER