Home › Engine / Hybrid System › 2ZR-FXE EMISSION CONTROL › PURGE VALVE
RM3210E _51 Engine / Hybrid System _047497 2ZR-FXE EMISSION CONTROL _0236609 PURGE VALVE A

2ZR-FXE EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 51444C 1.REMOVE REAR MOTOR UNDER COVER LH

Hide 2.DRAIN ENGINE COOLANT (for Engine)

Hide 12601B 3.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 16296 5.DISCONNECT NO. 8 WATER BY-PASS HOSE

a.
A377720

Slide the clip and disconnect the No. 8 water by-pass hose from the No. 3 water by-pass pipe.


Hide 16297 6.DISCONNECT NO. 9 WATER BY-PASS HOSE

a.
A377722

Slide the clip and disconnect the No. 9 water by-pass hose from the No. 3 water by-pass pipe.


Hide 17650G 7.REMOVE PURGE VALVE (PURGE VSV)

a.
A377724C01
1.792,0.948 2.104,0.542 2.104,0.542 2.323,0.542 true 1.365,0.948 1.208,0.354 1.208,0.354 0.979,0.354 true 2.354,0.458 2.552,0.677 0.198,0.219 10 true *1 0.75,0.271 0.969,0.469 0.219,0.198 10 true *2
*1 No. 1 Fuel Vapor Feed Hose
*2 No. 2 Fuel Vapor Feed Hose


Disconnect the purge valve (purge VSV) connector.


b.

Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).


c.

Disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).


d.
A377725

Remove the bolt and No. 3 water by-pass pipe from the camshaft housing sub-assembly.


e.
A377726

Remove the screw and purge valve (purge VSV) from the No. 3 water by-pass pipe.