Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING
RM3210E _58 Vehicle Interior _047504 INTERIOR PANELS / TRIM _0242015 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 63341 1.REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)

a.

Remove the No. 1 roof silencer pad.

B434608


Hide 63342 2.REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

a.

Remove the No. 2 roof silencer pad.

B434609


Hide 86101J 3.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 81340 4.REMOVE VANITY LIGHT ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.


a.
B434625C01
1.823,0.938 1.448,0.563 true 2.208,0.969 2.333,0.552 2.333,0.552 2.073,0.708 true 0.958,1.229 0.635,1.229 true 1.24,0.469 1.438,0.667 0.198,0.198 10 true *1 2.354,0.448 2.563,0.656 0.208,0.208 10 true *a 0.406,1.125 0.625,1.333 0.219,0.208 10 true *b
*1 Bulb Holder
*a Claw (A)
*b Claw (B)


Disengage the 2 claws (A) and separate the bulb holder from the vanity light assembly as shown in the illustration.


b.

Disengage the claw (B) to remove the vanity light assembly.


Hide 89732A 5.REMOVE THEFT WARNING ULTRASONIC SENSOR (w/ Intrusion Sensor)

Hide 82171 6.REMOVE NO. 1 ROOF WIRE

a.

Remove the adhesive tape from the roof headlining assembly.

B434627C01
1.604,1.448 1.073,1.521 1.073,1.521 1.344,1.354 true 1.594,2.104 1.094,2.219 1.094,2.219 1.365,2.031 true 1.594,2.76 1.115,2.865 1.115,2.865 1.365,2.688 true 1.625,4.031 1.052,4.115 1.052,4.115 1.24,3.979 true 1.25,4.51 1.042,4.344 1.042,4.344 1.583,4.24 true 1.063,4.344 1.615,4.531 true 1.646,5.427 1.094,5.469 1.094,5.469 1.365,5.313 true 2.5,0.094 2.917,0.5 0.417,0.406 12 false *A 2.5,3.417 2.917,3.833 0.417,0.417 12 false *B 0.5,0.583 0.917,0.917 0.417,0.333 12 false *C 0.51,3.26 0.906,3.667 0.396,0.406 12 false *D 0.854,1.427 1.438,2.167 0.583,0.74 12 false *G 0.906,2.771 1.385,3.344 0.479,0.573 12 false *H 0.896,2.125 1.375,2.615 0.479,0.49 12 false *E 0.833,3.99 1.417,4.729 0.583,0.74 12 false *G 0.875,5.365 1.354,5.938 0.479,0.573 12 false *H 0.844,4.24 1.323,4.729 0.479,0.49 12 false *E 4.083,1.052 4.333,1.302 0.25,0.25 12 true *F
*A w/o Sliding Roof *B w/ Sliding Roof
*C w/o Toyota Safety Sense *D w/ Toyota Safety Sense
*E w/ EC Mirror *F w/ Intrusion Sensor
*G for LHD with Humidity Sensor or Rain Sensor *H for RHD with Humidity Sensor or Rain Sensor
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B434630C01
0.167,0.51 0.75,1 0.583,0.49 12 false *A 0.167,3.917 0.75,4.333 0.583,0.417 12 false *B 3.833,4.604 4.219,4.948 0.385,0.344 12 false *C 1,2.052 1.25,2.26 0.25,0.208 10 true *a 1,5.375 1.25,5.583 0.25,0.208 10 true *a
*A w/o Sliding Roof *B w/ Sliding Roof
*C w/ Intrusion Sensor - -
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.


Hide 63352D 7.REMOVE NO. 2 ROOF HEADLINING PAD (w/ Roof Headlining Pad)

a.

Remove the No. 2 roof headlining pad.

B439358


Hide 63351B 8.REMOVE ROOF HEADLINING PAD (w/ Roof Headlining Pad)

a.

Remove the roof headlining pad.

B439359