89342B
1.REMOVE REAR SIDE ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
89342
2.REMOVE REAR CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
89342A
3.REMOVE REAR CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
89348T
4.REMOVE REAR SIDE ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
89348R
5.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
89348S
6.REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
81590A
7.REMOVE REAR LIGHT ASSEMBLY LH
81580D
8.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
82183
9.REMOVE NO. 3 LUGGAGE ROOM WIRE
w/o TOYOTA Parking Assist-sensor System:
Disengage the 7 clamps and remove the No. 3 luggage room wire.
w/ TOYOTA Parking Assist-sensor System:
Disengage the 12 clamps and remove the No. 3 luggage room wire.
52169C
10.REMOVE LOWER REAR BUMPER COVER
| *a | Hook |
|
Remove in this Direction |
Disengage the 2 claws as shown in the illustration.
Disengage the hook to remove the lower rear bumper cover.
52453
11.REMOVE CENTER REAR BUMPER GUARD (for Type A)
Remove the 2 screws.
|
Remove in this Direction |
Disengage the 14 claws as shown in the illustration to remove the center rear bumper guard.
52453
12.REMOVE CENTER REAR BUMPER GUARD (for Type B)
Remove the 2 screws.
Remove the 2 clips.
Disengage the 16 claws as shown in the illustration to remove the center rear bumper guard.
|
Remove in this Direction | - | - |
52566
13.REMOVE REAR BUMPER EXTENSION FILLER LH (for Type A)
Remove the 2 clips.
|
Remove in this Direction |
Disengage the 3 claws and 2 guides as shown in the illustration to remove the rear bumper extension filler LH.
52566
14.REMOVE REAR BUMPER EXTENSION FILLER LH (for Type B)
Remove the 2 clips.
|
Remove in this Direction |
Disengage the 3 claws and 2 guides as shown in the illustration to remove the rear bumper extension filler LH.
52565
15.REMOVE REAR BUMPER EXTENSION FILLER RH
Use the same procedure as for the LH side.
52461K
16.REMOVE NO. 1 REAR BUMPER PAD
Remove the No. 1 rear bumper pad.
Use the same procedure for the RH side and LH side.
52461L
17.REMOVE NO. 2 REAR BUMPER PAD
Remove the No. 2 rear bumper pad.
Use the same procedure for the RH side and LH side.
52191A
18.REMOVE REAR BUMPER ARM SEAL
Remove the rear bumper arm seal.
Use the same procedure for the RH side and LH side.
52461M
19.REMOVE NO. 3 REAR BUMPER PAD
Remove the No. 3 rear bumper pad.
Use the same procedure for the RH side and LH side.
52576
20.REMOVE REAR BUMPER SIDE RETAINER LH
|
Remove in this Direction |
Disengage the 3 clips as shown in the illustration.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the guide as shown in the illustration.
Disengage the claw as shown in the illustration to remove the rear bumper side retainer LH.
52575
21.REMOVE REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52592
22.REMOVE REAR BUMPER SIDE SEAL LH
| *1 | Rear Bumper Side Clip |
Remove the rear bumper side clip.
Remove the 3 clips and rear bumper side seal LH.
52591
23.REMOVE REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
52023
24.REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY
for Reinforcement Type A:
Remove the 8 bolts and rear bumper reinforcement sub-assembly.
52171A
25.REMOVE NO. 1 REAR BUMPER REINFORCEMENT
for Reinforcement Type B:
Remove the 6 bolts and No. 1 rear bumper reinforcement.
52016A
26.REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH
for Reinforcement Type B:
Remove the 4 bolts and rear bumper arm sub-assembly LH.
52015A
27.REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH
for Reinforcement Type B:
Use the same procedure as for the LH side.