Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › GRILLE SHUTTER
RM3210E _59 Vehicle Exterior _047542 EXTERIOR PANELS / TRIM _0243312 GRILLE SHUTTER A

EXTERIOR PANELS / TRIM  GRILLE SHUTTER  INSTALLATION  


PROCEDURE

Hide 53019B 1.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (for Type A)

a.
B436002C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


b.

Install the radiator shutter sub-assembly with the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Engage the clamp.


d.

Connect the connector.


Hide 53019B 2.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (for Type B)

a.
B436002C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


b.

Install the radiator shutter sub-assembly with the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Engage the 2 clamps.


d.

Connect the connector.


Hide 52618 4.INSTALL LOWER FRONT BUMPER ABSORBER

Hide 52611 5.INSTALL FRONT BUMPER ENERGY ABSORBER (for Type A)

Hide 52611 6.INSTALL FRONT BUMPER ENERGY ABSORBER (for Type B)

Hide 52136H 7.INSTALL FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT LH (for Type B)

Hide 52135J 8.INSTALL FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT RH (for Type B)

HINT:

Use the same procedure for the LH side.


Hide 9.INSTALL FRONT BUMPER ASSEMBLY