46410C
1.INSTALL FRONT PARKING BRAKE CABLE CLAMP (for LHD)
Engage the 2 claws to install a new front parking brake cable clamp to the No. 1 parking brake cable assembly.
Even if a one-piece type front parking brake cable clamp was originally installed, make sure to install a separate type front parking brake cable clamp.
46410
2.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)
Install the No. 1 parking brake cable assembly with the 4 bolts.
Engage the 2 clamps.
46410
3.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)
Install the No. 1 parking brake cable assembly with the 3 bolts.
Engage the clamp.
46410
4.CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY
| *a | Turn |
| *b | Hold |
Connect the No. 1 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly as shown in the illustration.
8598B
5.INSTALL INVERTER BATTERY (w/ Canister Pump Module)
58991B
6.INSTALL FRONT CONSOLE BOX MOUNTING BRACKET
Engage the claw.
Install the front console box mounting bracket with the 2 bolts.
Engage the 2 clamps.
46250
7.INSTALL PARKING BRAKE PEDAL ASSEMBLY (for LHD)
46250
8.INSTALL PARKING BRAKE PEDAL ASSEMBLY (for RHD)