Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR
RM3210E _59 Vehicle Exterior _047505 DOOR / HATCH _0244375 BACK DOOR A

DOOR / HATCH  BACK DOOR  REASSEMBLY  


PROCEDURE

Hide 68961 1.INSTALL BACK DOOR STAY BOLT

Hide 68960B 2.INSTALL BACK DOOR STAY ASSEMBLY LH

Hide 68950C 3.INSTALL BACK DOOR STAY ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 4.INSTALL BACK DOOR DUST PROOF SEAL

a.
B442179

Engage the guide and 2 claws to install the back door dust proof seal.

HINT:

Use the same procedure for the other 2 back door dust proof seals.



Hide 67005B 5.INSTALL BACK DOOR PANEL CUSHION

a.
B435633

Engage the 2 claws to install a new back door panel cushion.

HINT:

Use the same procedure for the RH side and LH side.



Hide 86790D 6.INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

Hide 81270 7.INSTALL LICENSE PLATE LIGHT ASSEMBLY

Hide 84840G 8.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

Hide 76801 9.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 85345R 10.INSTALL REAR WASHER NOZZLE (w/ Rear Wiper)

Hide 76085 11.INSTALL REAR SPOILER SUB-ASSEMBLY

Hide 67281B 12.INSTALL BACK DOOR LOWER STOPPER

a.
B435632

Engage the guide and install the back door lower stopper with the bolt.

HINT:

Use the same procedure for the RH side and LH side.



Hide 69350 13.INSTALL BACK DOOR LOCK ASSEMBLY

Hide 85110R 14.INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

Hide 85143R 15.INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper)

Hide 16.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)

Hide 67751 18.INSTALL BACK DOOR TRIM BOARD

a.
B435630C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 5 clips to install the back door trim board as shown in the illustration.


Hide 69321 19.INSTALL BACK DOOR LOCK COVER

a.
B435631

Engage the claw to install the back door lock cover.


Hide 67750 20.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

a.
B439174C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 11 clips and 2 claws to install the back door trim board assembly as shown in the illustration.


Hide 74811B 21.INSTALL DOOR PULL HANDLE

a.
B435615

Engage the 4 claws to install the door pull handle as shown in the illustration.

HINT:

With the back door fully open, install the door pull handle so that the arrow on the backside of door pull handle points down.



Hide 67938A 22.INSTALL BACK DOOR SIDE GARNISH LH

a.
B435628

Engage the claw and 3 clips to install the back door side garnish LH.


Hide 67937B 23.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 64790B 24.INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY

a.
B435626

Engage the 4 claws and 4 clips to install the back door upper trim panel assembly.