Home › General › MAINTENANCE › ENGINE
RM3210E _V1 General _047526 MAINTENANCE _0245040 ENGINE N

MAINTENANCE  ENGINE  GENERAL MAINTENANCE  


CAUTION / NOTICE / HINT

HINT:

Perform these procedures after the engine has cooled down.


PROCEDURE

Hide 1.INSPECT ENGINE OIL

Hide 2.REPLACE ENGINE OIL AND OIL FILTER

a.

Replace the engine oil and oil filter.

Click hereEngine / Hybrid System>2ZR-FXE LUBRICATION>OIL AND OIL FILTER>REPLACEMENT


Hide 3.INSPECT ENGINE COOLANT

Hide 4.REPLACE ENGINE COOLANT

Hide 5.INSPECT SPARK PLUGS

Hide 6.INSPECT AUXILIARY BATTERY

Hide 17801 7.INSPECT AIR CLEANER FILTER ELEMENT

a.

Remove the air cleaner filter element.


b.
A156094

Check that the air cleaner filter element is not excessively dirty.

If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.


c.

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


d.

Reinstall the air cleaner filter element.


Hide 8.INSPECT EXHAUST PIPES AND MOUNTINGS

a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.


Hide 77310A 9.INSPECT FUEL TANK CAP GASKET

Hide 10.INSPECT FUEL LINES, CONNECTIONS, AND FUEL TANK VAPOR VENT SYSTEM HOSES

a.

Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.


Hide 11.INSPECT CHARCOAL CANISTER