This DTC is stored when a malfunction occurs in the television antenna assembly which is connected to the navigation receiver assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C8 | Digital TV Antenna 1 Disconnected | Television antenna assembly is not connected | ·
Antenna cord sub-assembly (for radio antenna) ·
No. 2 antenna cord sub-assembly ·
No. 5 antenna cord sub-assembly ·
Television antenna assembly ·
Navigation receiver assembly |
Replace the antenna cord sub-assembly (for radio antenna) with a new or known good one.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO ANTENNA CORD>REMOVAL
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Replace the No. 2 antenna cord sub-assembly with a new or known good one.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO ANTENNA CORD>REMOVAL
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Replace the No. 5 antenna cord sub-assembly with a new or known good one.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO ANTENNA CORD>REMOVAL
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Replace the television antenna assembly with a new or known good one.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>TELEVISION ANTENNA>REMOVAL
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG