86741A
1.INSTALL TELEMATICS TRANSCEIVER
86101S
2.INSTALL ANTENNA CORD SUB-ASSEMBLY
Connect the 2 connectors.
Engage the claw to install the antenna cord sub-assembly.
3.INSTALL TELEMATICS TRANSCEIVER WITH ANTENNA CORD
Connect the connector.
Install the telematics transceiver with antenna cord with the 2 nuts.
Connect the connector.
4.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
55405B
5.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55435A
6.INSTALL INSTRUMENT PANEL FINISH PANEL END RH
7.PERFORM REGISTRATION