Panel Switches do not Function
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CHECK PANEL SWITCH |
Check for foreign matter around the switch that might prevent operation.
- OK:
- No foreign matter is found.
|
|
||||
| OK | |
| 2. CHECK PANEL SWITCH (DISPLAY CHECK MODE) |
Enter the "Display Check" mode (Panel Switch Check Mode) (Click here).

Operate the abnormal switch and check if the switch name and status are correctly displayed.
- OK:
- The switch name and status are correctly displayed as operated.
|
|
||||
| NG | ||
| ||
