Display does not Dim when Light Control Switch is Turned ON
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CHECK IMAGE QUALITY SETTING |
Enter the display adjustment screen by pressing the "DISPLAY" switch.

Turn the light control switch to the TAIL position.
Check if "Day Mode" on the display is ON.
- OK:
- "Day Mode" is ON.
|
|
||||
| NG | |
| 2. CHECK VEHICLE SIGNAL (DISPLAY VEHICLE SIGNAL) |
Enter the "Display Check" mode (Vehicle Signal Check Mode) (Click here).

Check that the display changes between ON and OFF according to the light control switch operation.
- OK:
Light Control Switch Condition
Display Condition
TAIL or ON
ON
OFF
OFF
- HINT:
- The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
|
|
||||
| OK | ||
| ||
