DISPLAY CHECK MODE
Troubleshooting · Vehicles built from Nov 2005
- HINT:
- This mode checks the color display on the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
- This mode checks the color display on the multi-display.
| ENTER DIAGNOSTIC MODE (Click here) |
| DISPLAY CHECK |
Select "Display Check" from the "Diagnostic MENU" screen.

| COLOR BAR CHECK |
Select "Color Bar Check" from the "Display Check" screen.

Select a color bar from the "Color Bar Check Mode" screen.

Check the displayed color.
- HINT:
- The entire screen turns to the color or stripe selected.
- Touch the display to return to the "Color Bar Check" screen.
- The entire screen turns to the color or stripe selected.
| TOUCH SWITCH CHECK |
Select "Touch Switch Check" from the "Display Check" screen.

Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

- HINT:
- A "+" mark is displayed on the display even after the user's finger is removed.
| PANEL SWITCH CHECK |
Select "Panel Switch Check" from the "Display Check" screen.

Operate each switch and check that the switch name and condition are correctly displayed.

Display
Contents
Push switch name /*1
- Name of the pressed switch is displayed.
- If more than one switch is pressed, "MULTIPLE" is displayed.
Rotary switch name /*2
Name of the rotary switch is displayed.
Rotary switch direction /*3
Direction of the rotary switch is displayed.
- Name of the pressed switch is displayed.
| VEHICLE SIGNAL CHECK |
Select "Vehicle Signal Check" from the "Display Check" screen.

When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

- HINT:
- Only conditions having inputs are displayed.
- This screen is updated once per second when input signals to the vehicle are changed.
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
- Only conditions having inputs are displayed.
| MIC AND VOICE RECOGNITION CHECK |
Select "Mic and Voice Recognition Check" from the "Display Check" screen to display the "MICROPHONE AND VOICE RECOGNITION CHECK" screen.

When audio is input to the microphone, check if the microphone input level meter varies accordingly.

Push the recording switch and record audio.
When recording, check that the recording indicator illuminates. Also check that the recorded audio can be played back normally.
- HINT:
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
| CAN CHECK |
Select "CAN Check" from the "Display Check" screen.

Check the "CAN CONNECTION CHECK" results.
- HINT:
- This function only operates with CAN connection type system.
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
- This function only operates with CAN connection type system.