Voice Recognition Difficulty
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CHECK CONDITION |
Check if the system's voice recognition level is low by using only one particular voice.
- OK:
- System's voice recognition level is low with any voice.
|
|
||||
| OK | |
| 2. CHECK MAP DISC |
Check that the map disc is not deformed or cracked.

- OK:
- No deformations or cracks appear on map disc.
|
|
||||
| OK | |
| 3. CHECK MAP DISC |
Check for dirt on the map disc surface.

- OK:
- No dirt is on map disc surface.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
- HINT:
- If the disc is dirty, clean the disc by wiping the disc's surface radially with a soft cloth.
|
|
||||
| OK | |
| 4. CHECK MICROPHONE (NAVIGATION CHECK MODE) |
Enter the "Microphone and Voice Recognition Check" mode (Click here).

When audio is input to the microphone, check if the microphone input level meter varies accordingly.
Push the recording switch and, while sitting in the driver seat, speak for approximately 5 seconds. When recording, check that the recording indicator illuminates.
Check that the recorded audio can be played back normally.
- OK:
- All check results are normal.
|
|
||||
| OK | ||
| ||
