NAVIGATION CHECK MODE
Troubleshooting · Vehicles built from Nov 2005
- HINT:
- This mode displays GPS satellite information.
- Illustrations may differ from the actual vehicle depending on the device setting and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
- This mode displays GPS satellite information.
| ENTER DIAGNOSTIC MODE (Click here) |
| NAVIGATION CHECK |
Select "Navigation Check" from the "Diagnosis MENU" screen.

| GPS INFORMATION |
Select "GPS Information" from the "Navigation Check" screen.

When GPS information is displayed, check the GPS conditions.

- HINT:
- This screen is updated once per second when input signals to the vehicle are changed.
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
- This screen is updated once per second when input signals to the vehicle are changed.
| VEHICLES SENSORS |
Select "Vehicle Sensors" from the "Navigation Check" screen.

Check all the signals and sensors when vehicle signal information is displayed.

- HINT:
- This screen is updated once per second when input signals to the vehicle are changed.
- This screen displays vehicle signals that are input to the navigation ECU.
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
- This screen is updated once per second when input signals to the vehicle are changed.
| COLOR BAR CHECK |
Select "Color Bar Check" from the "Navigation Check" screen.

Check each color of the bar when the "NAVI Color Bar Check" screen is displayed.

- HINT:
- Colors will not be displayed full-screen as in "Display Check Mode".
- This is the color display screen of the navigation ECU.
- Colors will not be displayed full-screen as in "Display Check Mode".
| MEMORY COPY / PASTE CHECK |
![]() ![]() |
- HINT:
- This function requires a special tool. This function cannot be performed without the tool.
| PARTS INFORMATION |
Select "Parts Information" from the "Navigation Check" screen.

Check the navigation and disc information when the "Parts Information" screen is displayed.

Screen Description Display
Contents
Navigation Manufacturer /*1
Radio and navigation assembly manufacturer is displayed.
Navigation Version /*2
Radio and navigation assembly version is displayed.
Disc Manufacturer /*3
Map disc manufacturer is displayed.
Disc Version /*4
Map disc version is displayed.
| MIC & VOICE RECOGNITION CHECK |
Select "Mic and Voice Recognition Check" from the "Navigation Check" screen to display the "MICROPHONE AND VOICE RECOGNITION CHECK" screen.

When audio is input to the microphone, check if the microphone input level meter varies accordingly.

Push the recording switch and record audio.
When recording, check that the recording indicator illuminates. Also check that the recorded audio can be played back normally.
- HINT:
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
- The signals of this function are input to the navigation ECU.
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
| DVD PLAYER INFORMATION CHECK |
Select "DVD Player Information" from the "Navigation Check" screen.

Check if trouble codes have been output.

- HINT:
- This is the DVD player check function of the navigation ECU.
- For detailed information on this function, refer to the "DIAGNOSIS DISPLAY DETAILED DESCRIPTION" procedures (Click here).
- This is the DVD player check function of the navigation ECU.
