FAIL-SAFE CHART
System information · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008
| FAIL SAFE OPERATION |
- If there is a problem with any sensor signals or actuator systems, the skid control ECU prohibits the power supply to the ABS and TRACTION actuator and informs the ECM of VSC system failure.
The ABS and TRACTION actuator turns off the solenoids and the ECM shuts off VSC control (traction control signal) from the skid control ECU accordingly, the result being that it is as if the ABS, TRC and VSC systems were not installed.
- ABS control is prohibited, but EBD control continues as far as possible. If EBD control is impossible, the BRAKE warning light comes on to warn the driver (Click here).
- If system components have any malfunctions before starting control, the operation stops immediately. If system components have any malfunctions during control, the control stops gradually so as not to trigger a sudden change in vehicle conditions.
If it is impossible to control the systems, the warning light comes on to inform the driver of malfunctions in the systems (Click here).
- HINT:
- If the ABS system malfunctions, the brake system operates normally without the ABS system.
- If the brake actuator malfunctions, a gradual loss of brake performance is expected, and ABS system control is prohibited.
- If the ABS system malfunctions, the brake system operates normally without the ABS system.
| Malfunction Area |
Fail-Safe Operation |
| ABS system |
ABS, BA, TRC and VSC control prohibited |
| BA system |
ABS, BA, TRC and VSC control prohibited |
| EBD system |
ABS, EBD, BA, TRC and VSC control prohibited |
| Malfunction Area |
Fail-Safe Operation |
| Engine control system (TRC and VSC systems) |
Before control: Disables control During control: Uses only the brakes to effect control |
| Brake control system (VSC system) |
Before control: Disables control During control: Uses only the engine to effect control |
| Brake control system (TRC system) |
Before control: Disables control During control: Disables control (by gradually ending control) |