C1203 ECM Communication Circuit Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2008
DESCRIPTION
The circuit is used to send TRC and VSC control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU through the CAN communication system.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1203 |
Engine, drive source and destination variations that are sent from the ECM do not match the ones of the skid control ECU. |
ECM |
INSPECTION PROCEDURE
| 1. CHECK PART NUMBER (SKID CONTROL ECU AND ECM) |
Check that the proper skid control ECU and ECM are installed.
- Result:
Result
Proceed to
Proper ECUs are installed.
for 2AZ-FE
A
for 2GR-FE
B
Proper ECUs are not installed.
C
|
|
||||
|
|
||||
| A | ||
| ||
