The skid control ECU measures the speed of each wheel by receiving signals from the speed sensor. These signals are used for recognizing that all 4 wheels are operating properly. Therefore, all wheel signals must be equal.
DTC No.
DTC Detection Condition
Trouble Area
C1337/37
When vehicle speed is 20 km/h (12 mph), difference of 20% or more in average of front wheel speed and average of rear wheel speed continues for 20 seconds 3 times consecutively.
Tire size
INSPECTION PROCEDURE
1. CHECK TIRE SIZE
Check the diameters of all 4 tires.
OK:
Diameters of all 4 tires are equal.
NG
REPLACE TIRES WITH 4 EQUAL SIZE TIRES
OK
2. CHECK SPEED SENSOR ROTOR
Remove the drive shaft, and check around the speed sensor rotor.