Illumination for Panel Switch does not Come on with Tail Switch ON
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. INSPECTION NIGHTTIME ILLUMINATION |
Turn on the light control switch and check the nighttime illumination of the vehicle interior.
Result: Result
Proceed to
Only radio and navigation assembly nighttime illumination does not operate
A
No nighttime illumination at all
B
|
|
||||
| A | |
| 2. INSPECT VEHICLE SIGNAL (DISPLAY CHECK MODE) |
Enter the "Display Check" mode (Vehicle Signal Check Mode) (Click here).

Check that the display changes between ON and OFF according to the light control switch operation.
- OK:
Light Control Switch
Display
TAIL or ON
ON
OFF
OFF
- HINT:
- This display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.
|
|
||||
| NG | ||
| ||
