INSTALLATION
Removal / installation · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1.
INSTALL FUEL FILLER OPENING LID LOCK RETAINER |
 |
Install the lock retainer and turn it counterclockwise as shown in the illustration.
| 2.
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY |
 |
- Install the cable and turn it clockwise as shown in the illustration.
Install the fuel lid lock open lever with the bolt.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
Install the cable to the clamps as shown in the illustration.


| 3.
INSTALL FRONT FLOOR CARPET ASSEMBLY |
|
| 4.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH |
 |
Install the deck trim side panel.
for Short Body (Click here)
for Long Body (Click here)
| 5.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH |
 |
Install the deck trim side panel.
for Short Body (Click here)
for Long Body (Click here)
| 6.
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET |
|
| 7.
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER |
|
| 8.
INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY (for Long Body)
|
 |
- Install the tether anchor bracket with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 9.
INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH
|
 |
- Attach the 6 claws to install the bezel.
| 10.
INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH
|
 |
- Attach the 6 claws to install the bezel.
| 11.
INSTALL REAR FLOOR FINISH PLATE |
 |
Install the rear floor finish plate.
for Short Body (Click here)
for Long Body (Click here)
| 12.
INSTALL BACK DOOR WEATHERSTRIP |
|
| 13.
INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE |
 |
Install the rear floor No. 1 mat support side plate.
for Short Body (Click here)
for Long Body (Click here)
| 14.
INSTALL JACK CARRIER ASSEMBLY (for Short Body)
|
 |
- Install the jack carrier with the 7 clips.
| 15.
INSTALL REAR FLOOR NO. 2 BOARD |
|
| 16.
INSTALL REAR FLOOR NO. 3 BOARD |
|
| 17.
INSTALL DECK BOARD ASSEMBLY |
|
| 18.
INSTALL REAR FLOOR NO. 1 BOARD |
|
| 19.
INSTALL TONNEAU COVER ASSEMBLY |
|
| 20.
INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY |
|
| 21.
INSTALL LOWER CENTER PILLAR GARNISH LH |
 |
Install the lower center pillar garnish.
for Short Body (Click here)
for Long Body (Click here)
| 22.
INSTALL LOWER CENTER PILLAR GARNISH RH |
 |
Install the lower center pillar garnish.
for Short Body (Click here)
for Long Body (Click here)
| 23.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
|
| 24.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
|
| 25.
INSTALL REAR DOOR SCUFF PLATE LH |
 |
Install the rear door scuff plate.
for Short Body (Click here)
for Long Body (Click here)
| 26.
INSTALL REAR DOOR SCUFF PLATE RH |
 |
Install the rear door scuff plate.
for Short Body (Click here)
for Long Body (Click here)
| 27.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
|
| 28.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
|
| 29.
INSTALL COWL SIDE TRIM BOARD LH |
 |
Install the cowl side trim board.
for Short Body (Click here)
for Long Body (Click here)
| 30.
INSTALL COWL SIDE TRIM BOARD RH |
 |
Install the cowl side trim board.
for Short Body (Click here)
for Long Body (Click here)
| 31.
INSTALL FRONT DOOR SCUFF PLATE LH |
 |
Install the front door scuff plate.
for Short Body (Click here)
for Long Body (Click here)
| 32.
INSTALL FRONT DOOR SCUFF PLATE RH |
 |
Install the front door scuff plate.
for Short Body (Click here)
for Long Body (Click here)
| 33.
INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
|
 |
Connect the connector.
Install the rear console box with the 2 bolts and 2 screws.
Install the console box carpet.
| 34.
INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER LH
|
 |
Attach the 2 claws to install the instrument panel bracket cover.
| 35.
INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER RH
|
 |
Attach the 2 claws to install the instrument panel bracket cover.
| 36.
INSTALL CONSOLE REAR END PANEL
|
 |
Attach the 6 claws to install the console rear end panel.
| 37.
INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
|
 |
Connect the connector.
Attach the 4 clips to install the upper rear console panel.
| 38.
INSTALL CONSOLE CUP HOLDER BOX
|
 |
Attach the 2 clips to install the cup holder box.
Install the 2 screws.
| 39.
INSTALL SWITCH BASE
|
 |
Connect the connectors.
Attach the 2 clips and 2 claws to install the switch base.
| 40.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
Automatic transaxle:
Connect the connector.
Attach the 2 clips and 4 claws to install the upper console panel.
Install the shift lever knob.
| 41.
INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH
|
 |
Attach the 4 clips to install the upper panel garnish.
| 42.
INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH
|
 |
Attach the 4 clips to install the upper panel garnish.
| 43.
INSTALL REAR NO. 1 SEAT ASSEMBLY LH |
 |
Install the rear No. 1 seat (Click here).
| 44.
INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
 |
Install the rear No. 1 seat (Click here).
| 45.
INSTALL FRONT SEAT ASSEMBLY LH |
 |
Install the front seat.
for Manual Seat (Click here)
for Power Seat (Click here)
| 46.
INSTALL FRONT SEAT ASSEMBLY RH |
 |
Install the front seat.
for Manual Seat (Click here)
for Power Seat (Click here)
| 47.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 48.
INSPECT SRS WARNING LIGHT |
 |
Inspect the SRS warning light (Click here).