INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
INSTALL FRONT BUMPER SIDE RETAINER LH |
 |
- Install the clip and bumper retainer.
Install the bolt.
-
Torque:
- 6.0 N*m{
61 kgf*cm
, 53 in.*lbf
}
| 2.
INSTALL FRONT BUMPER SIDE RETAINER RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 3.
INSTALL FRONT BUMPER REINFORCEMENT (w/ Front Bumper Lower Absorber) |
 |
- Install the reinforcement with the 8 bolts.
-
Torque:
- 70 N*m{
713 kgf*cm
, 51 ft.*lbf
}
Install the wire harness and attach the 5 claws.
| 4.
INSTALL FRONT BUMPER RETAINER (w/ Front Bumper Lower Absorber) |
 |
- Install the retainer with the bolt.
| 5.
INSTALL FRONT BUMPER ABSORBER LOWER (w/ Front Bumper Lower Absorber) |
 |
- Install the absorber.
| 6.
INSTALL FRONT BUMPER ENERGY ABSORBER (w/ Front Bumper Lower Absorber) |
 |
- Install the 2 absorbers.
| 7.
INSTALL NO. 2 FRONT BUMPER ENERGY ABSORBER (w/ Front Bumper Lower Absorber) |
 |
- Install the absorber.
| 8.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (w/o Front Bumper Lower Absorber) |
 |
- Install the reinforcement with the 8 bolts.
-
Torque:
- 70 N*m{
713 kgf*cm
, 51 ft.*lbf
}
- Install the wire harness and attach the 5 claws.
| 9.
INSTALL FRONT BUMPER RETAINER (w/o Front Bumper Lower Absorber) |
 |
- Install the bolt with the retainer.
| 10.
INSTALL NO.2 FRONT BUMPER ENERGY ABSORBER (w/o Front Bumper Lower Absorber) |
 |
- Install the absorber.
| 11.
INSTALL FRONT BUMPER COVER |
 |
- Put protective tape under the front fender and headlight.
Install the 4 clips.
- Install the hood cushion center.
w/ Headlight Cleaner:
Connect the headlight cleaner.
w/ Fog Light:
Connect the 2 fog light connectors.
- Attach the 4 claws to install the bumper cover.
- Install the 8 screws.
| 12.
INSTALL RADIATOR SUPPORT OPENING COVER |
 |
- Install the 2 clips.
| 13.
INSTALL RADIATOR GRILLE PROTECTOR |
 |
- Install the 2 radiator grille protectors.
| 14.
INSTALL FRONT FENDER LINER LH |
 |
- Install the fender liner with the clip and fender liner retainer.
w/ Splash Shield:
Install the front fender splash shield LH.
Install the screw, nut and bolt.
| 15.
INSTALL FRONT FENDER LINER RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 16.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|