2005-2008 RAV4 · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Aug 2007


1. REPLACE GENERATOR DRIVE END FRAME BEARING
  1. Remove the 4 screws and bearing retainer.

  1. A136844
    A136845E01
    Using SST and a hammer, tap out the bearing.
    SST
    09950-60010   (09951-00250)
    09950-70010   (09951-07100)

  1. A136847E01
    Using SST and a press, press in a new bearing.
    SST
    09950-60010   (09951-00250)
    09950-70010   (09951-07100)

  1. A136844
    Install the bearing retainer with the 4 screws.

    Torque:
    2.3 N*m{ 23 kgf*cm , 20 in.*lbf }

← INSPECTION (from Aug 2007)REASSEMBLY (from Aug 2007) →