Temporarily install a new turbine outlet elbow gasket and exhaust manifold converter with the 3 nuts.
Temporarily install the No. 2 exhaust manifold stay with the 2 bolts and nut.
Temporarily install the No. 2 manifold stay with the 3 bolts.
Temporarily install the No. 1 manifold stay with the bolt and nut.
Tighten the 2 bolts of the No. 2 exhaust manifold stay to the cylinder block.
Torque:
56 N*m{
571 kgf*cm
, 41 ft.*lbf
}
NOTICE:
Make sure to tighten the upper bolt first and the lower bolt last.
Tighten the 3 nuts of the exhaust manifold converter to the turbocharger sub-assembly (while pushing the manifold converter towards the turbocharger sub-assembly).
Torque:
25 N*m{
255 kgf*cm
, 18 ft.*lbf
}
Tighten the nut of the No. 2 exhaust manifold stay to the exhaust manifold converter.
Torque:
56 N*m{
571 kgf*cm
, 41 ft.*lbf
}
Tighten the bolt of the No. 2 manifold stay to the exhaust manifold converter.
Torque:
56 N*m{
571 kgf*cm
, 41 ft.*lbf
}
HINT:
Ensure that the stay is pushed flush to the cylinder block and manifold converter while tightening.
Tighten the 2 bolts of the No. 2 manifold stay to the cylinder block.
Torque:
56 N*m{
571 kgf*cm
, 41 ft.*lbf
}
Tighten the bolt of the No. 1 manifold stay to the cylinder head.
Torque:
25 N*m{
255 kgf*cm
, 18 ft.*lbf
}
HINT:
Ensure that the stay is pushed flush to the cylinder block and manifold converter while tightening.
Tighten the nut of the No. 1 manifold stay to the exhaust manifold converter.
Torque:
25 N*m{
255 kgf*cm
, 18 ft.*lbf
}
9.
INSTALL NO. 2 MANIFOLD CONVERTER INSULATOR
Install the No. 2 manifold converter insulator with the 3 nuts.
Torque:
29 N*m{
291 kgf*cm
, 21 ft.*lbf
}
10.
INSTALL NO. 1 MANIFOLD CONVERTER INSULATOR
Install the No. 1 manifold converter insulator with the 5 bolts.