2005-2008 RAV4 · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Aug 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. REMOVE CENTER AIRBAG SENSOR ASSEMBLY
  1. Remove the center airbag sensor (Click here).

    HINT:
    Refer to the procedures from the disconnection of the negative battery cable up until the removal of the center airbag sensor.


2. LOOSEN LOCK NUT AND NO. 1 WIRE ADJUSTING NUT

C127319E01

3. REMOVE PARKING BRAKE EQUALIZER

  1. C129065E02
    Disconnect the 3 cable ends and then remove the equalizer.


4. REMOVE REAR WHEEL

5. REMOVE PARKING BRAKE CABLE

C127323E01
  1. Remove the cable clamp (labeled A) from the body.

  1. Remove the casing cap bolt (labeled B) from the body.

  1. Remove the clamp bolt (labeled C) from the body.

  1. Remove the clamp bolt (labeled D) from the crossmember.

  1. Remove the clamp bolt (labeled E) from the rear suspension crossmember.

  1. Remove the clamp bolt (labeled F) from the trailing arm.

  1. Disconnect the cable from the parking brake shoe lever and backing plate.

    1. Disconnect the cable from the lever (Click here).

    2. Remove the bolt and disconnect the cable from the backing plate.

← REMOVAL (Jan 2007 – Jul 2007)INSTALLATION (Nov 2005 – Dec 2006) →