REMOVAL
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE REAR CONSOLE BOX SUB-ASSEMBLY |
 |
Remove the rear console box (Click here).
- HINT:
- Refer to the procedures from the removal of the No. 1 console upper panel garnish up until the removal of the rear console box sub-assembly.
| 3.
REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY |
 |
Disconnect the parking brake switch connector.
- Remove the lock nut and wire adjusting nut.
- Disconnect the No. 1 parking brake cable from the parking brake equalizer.
- Remove the 2 bolts and parking brake lever (with the No. 1 parking brake cable).
| 4.
REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
 |
Disconnect the cable from the lever.
| 5.
REMOVE PARKING BRAKE SWITCH ASSEMBLY |
 |
Remove the screw and switch from the lever.