INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT REAR WIPER MOTOR ASSEMBLY |
![]() ![]() |
Check the wiper operation.
Connect the battery's positive (+) lead to terminal 3 (+B) and the negative (-) lead to terminal 1 (LS), and check that the motor operates.
- OK:
- Motor operates.
Check the INT operation.
Connect the battery's positive (+) lead to terminal 3 (+B) and the negative (-) lead to terminal 2 (C1), and check that the motor operates.
- OK:
- Motor operates.
Check the automatic stop operation.
Connect the battery's positive (+) lead to terminal 3 (+B) and the negative (-) lead to terminal 1 (LS). With the motor rotating, disconnect terminal 3 (+B) to stop the wiper motor operation at the automatic stop position.
Check that the motor stops automatically at the automatic stop position.

- OK:
- Refer to illustration.

