2005-2008 RAV4 · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2007


DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

REMOVE IG1 RELAY
  1. Remove the IG1 relay from the instrument panel junction block.


INSPECT IG1 RELAY

  1. A092673E14
    Measure the resistance of the IG1 relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.


INSTALL IG1 RELAY

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← ON-VEHICLE INSPECTION (from Aug 2007)ON-VEHICLE INSPECTION (from Aug 2007) →