2005-2008 RAV4 · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Jan 2007 – Jul 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. REMOVE MANUAL TRANSAXLE ASSEMBLY
  1. Remove the manual transaxle.
    For E352F, E359F, refer to the following procedures (Click here).
    For E352, refer to the following procedures (Click here).


2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

C127501
  1. Remove the fork together with the clutch release bearing from the transaxle.


3. REMOVE CLUTCH RELEASE FORK BOOT

4. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
  1. Remove the bearing from the clutch release fork.


5. REMOVE RELEASE BEARING HUB CLIP

6. REMOVE RELEASE FORK SUPPORT
  1. Remove the support and release fork from the transaxle.


7. REMOVE CLUTCH COVER ASSEMBLY

C127502E01
  1. Place matchmarks on the cover and flywheel.

  1. Loosen each set bolt one turn at a time until the spring tension is released.

  1. Remove the 6 set bolts and pull off the cover.

    NOTICE:
    Do not drop the clutch disc.


8. REMOVE CLUTCH DISC ASSEMBLY
← REMOVAL (Nov 2005 – Dec 2006)REMOVAL (from Aug 2007) →