Remove the manual transaxle. For E352F, E359F, refer to the following procedures (Click here). For E352, refer to the following procedures (Click here).
2.
REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
Remove the fork together with the clutch release bearing from the transaxle.
3.
REMOVE CLUTCH RELEASE FORK BOOT
4.
REMOVE CLUTCH RELEASE BEARING ASSEMBLY
Remove the bearing from the clutch release fork.
5.
REMOVE RELEASE BEARING HUB CLIP
6.
REMOVE RELEASE FORK SUPPORT
Remove the support and release fork from the transaxle.
7.
REMOVE CLUTCH COVER ASSEMBLY
Place matchmarks on the cover and flywheel.
Loosen each set bolt one turn at a time until the spring tension is released.