INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT COMMON RAIL ASSEMBLY |
Inspect the fuel pressure sensor.

Measure the resistance of the sensor.
- HINT:
- Perform the inspection with no fuel pressure applied.
- Standard resistance:
Tester Connection
Specified Condition
5 (PR) - 4 (E2)
16.4 kΩ or less
2 (PR2) - 3 (E2S)
16.4 kΩ or less
6 (VC) - 5 (PR)
3 kΩ or less
1 (VCS) - 2 (PR2)
3 kΩ or less
Inspect the pressure discharge valve.

Measure the resistance of the valve.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
0.85 to 1.05 Ω
- HINT:
- The temperature indicated in "Condition" is the temperature of the pressure discharge valve.
