INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT FUEL SUPPLY PUMP ASSEMBLY |
Inspect the suction control valve.

Measure the resistance of the valve.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
1.9 to 2.3 Ω
- HINT:
- The temperature indicated in "Condition" is the temperature of the suction control valve.
Inspect the fuel temperature sensor.
Measure the resistance of the sensor.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68 °F)
2.32 to 2.59 Ω
1 - 2
80°C (176 °F)
0.310 to 0.326 Ω
