Skid Control Buzzer Circuit
Circuit diagnosis · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008
DESCRIPTION
The skid control buzzer sounds while the VSC is activated.WIRING DIAGRAM


INSPECTION PROCEDURE
- NOTICE:
- When replacing the ABS and TRACTION actuator, perform the zero point calibration (Click here).
| 1. CHECK CAN COMMUNICATION SYSTEM |
 |
Check if the CAN communication DTC is output (Click here).
Result
Result
|
Proceed to
|
DTC is not output
|
A
|
DTC is output
|
B
|
|
B |
 |
|
| REPAIR CAN COMMUNICATION SYSTEM |
|
|
| A |
|
 |
|
| 2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SKID CONTROL BUZZER) |
 |
Using the intelligent tester's Active Test, generate a control command, and then check that the skid control buzzer operates.
Skid control ECU
Item (Display)
|
Test Details
|
Diagnostic Note
|
Buzzer
|
Turns skid control buzzer ON / OFF
|
Buzzer can be heard
|
- OK:
- The skid control buzzer can be heard.
|
OK |
 |
|
| REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY |
|
|
| NG |
|
 |
|
| 3. CHECK COMBINATION METER |
 |
Check the combination meter (Click here).
|
NG |
 |
|
| REPLACE COMBINATION METER |
|
|
| OK |
|
 |
|
| REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY |
|