2005-2008 RAV4 · Service Manual BRAKE

Skid Control Buzzer Circuit

Circuit diagnosis · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008

DESCRIPTION

The skid control buzzer sounds while the VSC is activated.

WIRING DIAGRAM

C122524E03

INSPECTION PROCEDURE

NOTICE:
When replacing the ABS and TRACTION actuator, perform the zero point calibration (Click here).


1. CHECK CAN COMMUNICATION SYSTEM
  1. Check if the CAN communication DTC is output (Click here).

    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
REPAIR CAN COMMUNICATION SYSTEM
A


2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SKID CONTROL BUZZER)
  1. Using the intelligent tester's Active Test, generate a control command, and then check that the skid control buzzer operates.

    Skid control ECU 
    Item (Display)
    Test Details
    Diagnostic Note
    Buzzer
    Turns skid control buzzer ON / OFF
    Buzzer can be heard

    OK:
    The skid control buzzer can be heard.



OK
REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY
NG


3. INSPECT COMBINATION METER
  1. Inspect the combination meter (Click here).



NG
REPLACE COMBINATION METER
OK

REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY


← AUTO LSD Indicator Light does not Come ON (from Aug 2008)Skid Control Buzzer Circuit (Jan 2007 – Jul 2007) →