ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| REMOVE WINDSHIELD DEICER RELAY (Marking: DEICER) |
Remove the defogger relay from the engine room No. 2 relay block.
| INSPECT WINDSHIELD DEICER RELAY |
![]() ![]() |
Measure the resistance of the relay.
- Standard resistance:
Tester Connection
Specified Condition
3 - 5
10 kΩ or higher
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
| INSTALL WINDSHIELD DEICER RELAY |


