2005-2008 RAV4 · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Nov 2005


CHECK BRAKE DISC INSIDE DIAMETER

  1. C127308
    Using a drum gauge or equivalent, measure the inside diameter of the disc.

    Standard inside diameter:
    172 mm (6.77 in.)

    Maximum inside diameter:
    173 mm (6.81 in.)

    If the inside diameter is greater than the maximum, replace the disc.


CHECK PARKING BRAKE SHOE LINING THICKNESS

  1. C127307
    Using a ruler, measure the shoe lining thickness.

    Standard thickness:
    3.5 mm (0.138 in.)

    Minimum thickness:
    1.0 mm (0.039 in.)

    If the shoe lining thickness is equal to or less than the minimum, replace the brake shoe assembly.


CHECK BRAKE DISC AND PARKING BRAKE SHOE LINING FOR PROPER CONTACT

  1. C127309
    Apply chalk to the inside surface of the disc. Touch the brake shoe to the disc and check that there is full contact between the brake shoe and disc (white chalk is transferred to the entire brake shoe).
    If the contact is not as specified, use a shoe grinder to repair the brake shoe, or replace the brake shoe assembly.

← DISASSEMBLY (from Nov 2005)REASSEMBLY (Nov 2005 – Dec 2006) →