2005-2008 RAV4 · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Nov 2005


1. REPLACE GENERATOR DRIVE END FRAME BEARING

  1. A115765
    Remove the 4 screws and retainer.

  1. A122147E01
    Using SST and a hammer, tap out the bearing.
    SST
    09950-60010   (09951-00470)
    09950-70010   (09951-07100)

  1. A115764E02
    Using SST and a press, press in a new bearing.
    SST
    09950-60010   (09951-00470)
    09950-70010   (09951-07100)

  1. Install the retainer plate with the 4 screws.

← INSPECTION (from Nov 2005)REASSEMBLY (from Nov 2005) →