ADJUSTMENT
Removal / installation · Vehicles built from Aug 2007
| 1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
![]() ![]() |
Loosen the 2 bolts of the park/neutral position switch and set the shift lever to the N position.
Align the groove with the neutral basic line.
Hold the park/neutral position switch in this position and tighten the 2 bolts.
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
After the adjustment, perform the switch operation check (Click here).


